Sma SUNNY BOY Manual de usuario Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 48
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
Measurement Channels and Messages SMA Solar Technology AG
32 SB_SMC-BEN092840 User Manual
6.3 Error messages
If an error occurs, the Sunny Boy and Sunny Mini Central generate a message which depends on the
operating mode and the error detected.
Message Description and corrective measure
!PV-Overvoltage!
!DISCONNECT DC!
Overvoltage at DC input.
Corrective measures
Please contact your installer who will immediately disconnect the
PV generator from the inverter! Otherwise, the inverter may be
damaged.
Your installer should check the DC voltage, as described in the
inverter installation guide.
ACVtgRPro The 10-minute-average grid voltage is no longer within the permissible
range. This can be caused by either of the following:
The grid voltage at the connection point is too high.
The grid impedance at the connection point is too high.
The inverter disconnects to assure compliance with the voltage quality of
the grid.
Corrective measures
Please contact your installer or the SMA Solar Technology
Serviceline.
Bfr-Srr Internal measurement comparison fault or hardware defect.
Corrective measures
Please contact your installer or the SMA Solar Technology
Serviceline if this problem recurs.
CAN Internal communication fault.
Corrective measures
Please contact your installer or the SMA Solar Technology
Serviceline if this problem recurs.
Check L-N-PE L and N are swapped on the AC connection or PE is not connected (only
applies for Sunny Mini Central models 9000TL / 1000TL / 11000TL).
Corrective measures
Please contact your installer to check the AC connection.
Check Varistor At least one of the varistors is defective (only applies to Sunny Mini
Central models 9000TL / 1000TL / 11000TL).
Corrective measures
Have your installer check the function of the varistors, as described
in the inverter installation guide.
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Comentarios a estos manuales

Sin comentarios